|Theme:||Precise lighting: Control of LEDs with current-controlled EtherCAT Terminals|
|Date:||Thu. 19.11.2020, 10:30 a.m. (UTC+1)|
Exact current control and synchronization of LED lamps. The LED strobe control terminals supply an LED with the desired current and voltage. Applications from continuous light to short light pulses in the kHz range are thus possible. Extensive real-time diagnostic, e.g., for input current/voltage and output current/voltage allow detailed monitoring of the LED light intensity. Overdrive applications are also possible with short high-current pulses through the LED.
In this 30-minute webinar, Sina Sampl, Product Manager I/O, begins with a brief introduction to LED technology before describing the functions of the different LED terminals. In addition, the EL2596-00x0 and EL2595 terminals are compared with each other and the functionality of the EL2595-00x0 described in greater detail. The parameterization and the functionality are then illustrated on the basis of a short practical example. In addition, the product manager presents an overview of the control of LEDs with digital output terminals from Beckhoff.
Afterwards, the speaker will be available to take questions from the participants.